Micropositioners

ACCESSORIES FOR PROBE STATIONS - Micropositioners

From the basic joystick model to the high-end submicronic version, our positioners are used on all types of probers to access conductive pads or lines down to the micron
• Economical models include three control knobs on each side and rear
• Highest models have in-line knobs preserving maximum space on the platen
• A high frequency RF range is available
• Hold down to the platen is magnetic or by vacuum or bolt-down (RF versions)

 
General use
Serie of micropositioners adapted to research applications where the need is an ideal compromise between a good placement accuracy and an affordable price.
• Landing precision adapted to pads down to few microns
• Platen holding by vacuum or magnetic base
• Accepts different probe holders (standard, coax...)
• Optional pivot head allows a quick Z pre-positioning
• Proven excellent lifetime
S750
Joystick micropositioner
Joystick micropositioner
This low cost micropositioner was developped for hybrids probing or general probing on 500 µm and larger pads.

- The joystick positioner S750 will accept standard probe holders model Ux.
- A large scan area is coupled with the adjustable Z movement
- The base is magnetic and the overall dimensions particularly low
- The spring probe clamp is isolated from the rest of the body while maintaining electrical conductance through a wire termination
- A model S750-1 with joystick extension is available for more precision of positioning
S725S
Micropositioner S725 with spring head
Micropositioner S725 with spring head
This micropositioner will allow landing on pads or lines down to 20µm.

- Spring head (for fragile surface or temperature), allows limiting the pressure of needles on the pads
S725P
Micropositioner S725 with pivot head
Micropositioner S725 with pivot head
This economic micropositioner will allow landing on pads or lines down to 20 µm.

- Pivot head (quick Z down before fine adjust, ideal for probe station)
S725HT
Micropositioner S725 for high temperature
Micropositioner S725 for high temperature
This economic micropositioner will allow probe tips to land on pads or lines down to 20 µm.

- Special model for temperature probe test measurement
S926P
Precision micropositioner S926 with pivot head
Precision micropositioner S926 with pivot head
This Precision positioner packaged in a small footprint allows placing probe tip on pads ou lines within accuracy of the micrometer.

- The Pivot head is perfect for a quick positioning in Z
- Other versions of the S926 offer Spring head (limiting needle pressure) or fixed head
High precision
High frequency & Motorized
Micropositioners for high frequency probing are specifically designed for the microwave coplanar heads. They offer a travel of 25 mm on each axis and a safety system preventing unexected movement of the tips (cross roller bearing)

The motorized micropositioners are controlled by computer or by joystick and specifically designed to connect to the Checkmate serie submicronic tests stations. They allow automatic sub-routines inside a die while using other positioners or a probecard for biasing


SLAP90-E
RF Micropositioner for extender
RF Micropositioner for extender
This micropositioner, which is specific to ultra-high frequency RF measurements with a milimetric head, accommodates frequency multipliers.

- East, West configuration
- Screwed base for a better stability
- Angular adjustment to ensure the contact of milimetric heads (GS, GSG configurations)
- Compatible with differents frequency extender models (Rohde et Schwarz, Keysight, ...)
SM40
RF & Microwave micropositioner
RF & Microwave micropositioner
The SM40 micropositioner is specifically designed for RF probing, it has one inch translation capabilities in all axes and a cross-roller bearings to prevent accidentally moving the tip if bumped.

- Accepts all types of coplanar RF probes
- Perfectly stable with screw-lock fixation on the platen (optional magnetic base)
- An integral co-planarity adjustment provides for adjusting multicontact planarities (GS, GSG, GSGSG configurations)
- It is available with various head configurations allowing the microwave head to be introduced from the front, rear

SM90
RF & Microwave micropositioner
RF & Microwave micropositioner
The SM90 micropositioner is specifically designed for RF probing, it has one inch translation capabilities in all axes and a cross-roller bearings to prevent accidentally moving the tip if bumped.

- Accepts all types of coplanar RF probes
- Perfectly stable with screw-lock fixation on the platen (optional magnetic base)
- An integral co-planarity adjustment provides for adjusting multicontact planarities (GS, GSG, GSGSG configurations)
- It is available with various head configurations allowing the microwave head to be introduced from the front, rear
For technical and commercial information, quote, ordering or request of visit by our representative. +33 (0)476 561 617

5 rue de la Verrerie

38120 Le Fontanil-Cornillon

Grenoble / France

Fax : +33(0) 476 757 484

RCS Grenoble B 381 001 171 - APE 4652Z

TVA FR 48 381 001 171