WL210      8" high accuracy RF manual probe station

WL210 : 8 WL210 : 8

Part Number

WL210

Designation

8" high accuracy RF manual probe station

Description

The WaveLink series represents the most accomplished HF probing stations, available for wafer up to 12".

- No resonnance up to 500 Ghz
- Upgradability from one version to another
- Manual or Semi-automatic version
- Optional thermal charactherization (-60°C to +300°C)
- Allows up to 4 RF micropositioners and 4 DC micropositioners simultaneously

MOST POPULAR REFERENCES

WL210 : Version 200 mm
WL310 : Version 300 mm

Technical Specifications

Sample size

200 mm

Sample holding

Vacuum hole, zone selection

Chuck travel X-Y

200 mm

Chuck material

Nickel

Resolution

14 µm per degree of knob rotation

Accuracy

1 µm

Chuck stage Z travel

250µm - Pneumatic

Chuck planarity adjustment

Yes

Planarity

< 10 µm

Theta range

+/- 11 °

Theta resolution

0.01 per degree of knob rotation

Rotation lock

Yes

Z range platen

38mm with lock

Contact/no contact platen lever

4 mm with +/- 1 µm repeatability

Platen material

Aluminum (vacuum basis only)

XY scope stage travel

X-Y 50x50mm - Resolution 2µm

Microscope lift

100mm (4 in) vertical Pneumatic

Calibration Chuck

Calibration chuck with independant angular setup

Associated products

RF & Microwave micropositioner

SM40RF & Microwave micropositioner

The SM40 micropositioner is specifically designed for RF probing, it has one inch translation capabilities in all axes and a cross-roller bearings to prevent accidentally moving the tip if bumped.

- Accepts all types of coplanar RF probes.
- Perfectly stable with screw-lock fixation on the platen (optional magnetic base).
- An integral co-planarity adjustment provides for adjusting multicontact planarities (GS, GSG, GSGSG configurations).
- It is available with various head configurations allowing the microwave head to be introduced from the front, rear.

Single-objective microscope

AZOOMµSingle-objective microscope

This microscope allows the same magnification than a multi-objectives turret miscoscope in a smaller footprint.
Its trinocular head allows the use of digital camera and/or a laser.


- The illumination is made by LED
- C-mount for camera
- High working distance (WD)
RF & Microwave micropositioner

SM90RF & Microwave micropositioner

The SM90 micropositioner is specifically designed for RF probing, it has one inch translation capabilities in all axes and a cross-roller bearings to prevent accidentally moving the tip if bumped.

- Accepts all types of coplanar RF probes.
- Perfectly stable with screw-lock fixation on the platen (optional magnetic base).
- An integral co-planarity adjustment provides for adjusting multicontact planarities (GS, GSG, GSGSG configurations).
- It is available with various head configurations allowing the microwave head to be introduced from the front, rear.
High performance RF probe from 220 to 325GHz

MWRF-325B(BT)High performance RF probe from 220 to 325GHz

Serie sof high performance probes for Microwave application from 220 to 325GHz, GSG, GS or SG configuration.

- These probes are available in different pitch from 25µm to 90µm
- We recommend a GSG footprint for best performance
- Low loss and low dispersion characteristics, reliable low resistance contact
- WR-3 waveguide, Bias T option available
- Available in BeCu
RF probe 110 GHz

MWRF-110HRF probe 110 GHz

Serie of probes for RF Microwave applications up to 110GHz, GSG, GS, SG or "dual" configurations (dual = 2 probes on 1 positionner)

- These probes are available in different pitch from 25µm to 1250µm
- Various mounting styles for positionners
- Female connector 1mm
- Available in BeCu, Tungsten or Nickel
- Non magnetic option
Mono zoom microscope

MS12ZMono zoom microscope

This microscope is composed by a single objective and an internal zoom.
It allows a wide range of magnification without turret disadvantage for probing application.


- Light and compact
- Large working distance WD (ideal for high frequencies measurements applications)
- C-mount for camera
- High brightness (LED optical fiber)
RF micropositioner for extender

SLAP90-ERF micropositioner for extender

This micropositioner, which is specific to ultra-high frequency RF measurements with a milimetric head, accommodates frequency multipliers.

- East, West configuration
- Screwed base for a better stability
- Angular adjustment to ensure the contact of milimetric heads (GS, GSG configurations)
- Compatible with differents frequency extender models (Rohde & Schwarz, Keysight, VDI ...)
High performance RF probe from 500 to 750GHz

MWRF-750B(BT)High performance RF probe from 500 to 750GHz

Serie of high performance probes for Microwave application from 500 to 750GHz, GSG, GS or SG configuration.

- These probes are available in different pitch from 25µm to 35µm
- We recommend a GSG footprint for best performance
- Low loss and low dispersion characteristics, reliable low resistance contact
- WR-1.5 waveguide, Bias T option available
- Available in BeCu
High performance RF probe from 750 to 1.1THz

MWRF-1100B(BT)High performance RF probe from 750 to 1.1THz

Series of high performance probes for Microwave applications from 750 to 1100GHz, GSG, GS or SG configurations.

- These probes are available in different pitch from 25µm to 35µm
- We recommend a GSG footprint for best performance
- Low loss and low dispersion characteristics, reliable low resistance contact
- WR-1.0 waveguide, Bias T option available
- Available in BeCu
Digital camera

MOTICAM1080XDigital camera

This camera is very helpfull for direct vision to put probes easily.

- Compatible with our trinoculars microscopes
- C mount
- Multi-outputs for direct vision on monitor (HDMI) and USB
For technical and commercial information, quote, ordering or request of visit by our representative.
+33 (0)476 561 617

5 rue de la Verrerie

38120 Le Fontanil-Cornillon

Grenoble / France

Fax : +33(0) 476 757 484

RCS Grenoble B 381 001 171 - APE 4652Z

TVA FR 48 381 001 171